Failed to send audit log: Unauthorized
Request Payload: {"EntityTypeId":11,"EntityId":35143,"ChangedBy":{"UserId":3582,"Name":"Abdul Chesnut"},"ChangeType":"Updated","OldValue":{"Site":"Bowers","Department":null,"InspectionName":null,"AssetType":"P&M","InspectionType":"Air Compressor Inspection Checklist","Status":"Inspection request","Asset":"P&M - APA/AAON/P-A/HYD/01","AssignedTo":"","DueDate":null,"NonOqshaAssets":null,"Sections":[{"SectionId":2,"SectionName":"Equipment Status","SectionType":"radio","MandatoryChecksCount":0,"OrganisationId":null,"Status":1,"Rank":1,"AllowAttachments":true,"FileUploadControl":{"IsCameraAllowed":true,"IsImageUploadAllowed":true,"IsVideoUploadAllowed":true,"IsAudioUploadAllowed":true,"IsFileUploadAllowed":true},"Checks":[{"Id":"2_1","Check":"Equipment Status at Site","Type":"dynamicradiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"In Site"},{"OptionId":2,"OptionText":"Out of Site"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"vertical"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":0,"WidthPercentage":100},"DisplayValue":"In Site"},{"Id":"2_2","Check":"Equipment Usage Status","Type":"dynamicradiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"In Usage"},{"OptionId":2,"OptionText":"Out of Usage"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"vertical"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":1,"WidthPercentage":100},"DisplayValue":"In Usage"}],"IsMainSection":false,"AllowTaskAssociation":false,"AllowTaskAssociationV2":false,"IsMandatoryAttachment":false,"IsSectionTable":false,"MaxRows":null,"RequiredRows":1,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"SectionFiles":[{"Value":"attachments\\211\\inspections\\image_1784115368297_2026-07-15_11-36-10-3610_bb445b6a-0048-4021-9092-93fabdf8ca27.jpeg","FileType":"Image"}]},{"SectionId":1,"SectionName":"Inspection checks","SectionType":"checkbox","MandatoryChecksCount":0,"OrganisationId":null,"Status":1,"Rank":2,"AllowAttachments":true,"FileUploadControl":{"IsCameraAllowed":true,"IsImageUploadAllowed":false,"IsVideoUploadAllowed":false,"IsAudioUploadAllowed":false,"IsFileUploadAllowed":false},"Checks":[],"IsMainSection":false,"AllowTaskAssociation":false,"AllowTaskAssociationV2":false,"IsMandatoryAttachment":true,"IsSectionTable":false,"MaxRows":null,"RequiredRows":1,"ConditionalRules":[{"sourceSectionId":"2","sourceFieldId":"2_1","condition":"equals","value":2,"actions":"hide"},{"sourceSectionId":"2","sourceFieldId":"2_2","condition":"equals","value":2,"actions":"hide"}],"VisibilityRules":[],"AccessControlRules":[],"LabelStyle":{"bold":false,"italic":false,"underline":false,"fontSizePx":14,"textColor":"#111827","backgroundColor":"transparent"},"SectionFiles":[{"Value":"attachments\\211\\inspections\\image_1784115376064_2026-07-15_11-36-17-3617_f44256f4-13c4-4792-8aae-1f83aa80fa2b.jpeg","FileType":"Image"}]},{"SectionId":3,"SectionName":"Check Points","SectionFiles":[{"Value":"attachments\\211\\inspections\\image_1784115390261_2026-07-15_11-36-31-3631_26562106-48f9-4c08-acaf-2c62e004e73a.jpeg","FileType":"Image"}],"SectionType":"radio","AllowAttachments":true,"AllowTaskAssociation":false,"FileUploadControl":{"IsCameraAllowed":true,"IsImageUploadAllowed":true,"IsVideoUploadAllowed":true,"IsAudioUploadAllowed":true,"IsFileUploadAllowed":true},"Checks":[{"Id":"3_1","Check":"1.Is air compressor physically in good condition with TPI certificate?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":0,"WidthPercentage":100},"DisplayValue":"Yes"},{"Id":"3_2","Check":"2.Is motor physical condition is good and guard is provided to rotary part?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":1,"WidthPercentage":100},"DisplayValue":"Yes"},{"Id":"3_3","Check":"3.Is inspection date and due date was marked properly and visible?","Type":"radiobutton","Value":"2","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":2,"WidthPercentage":100},"DisplayValue":"No"},{"Id":"3_4","Check":"4.Is piston was in good condition?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":3,"WidthPercentage":100},"DisplayValue":"Yes"},{"Id":"3_5","Check":"5.Is pressure gauge was free from defect and working in condition with calibration as per requirement?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":4,"WidthPercentage":100},"DisplayValue":"Yes"},{"Id":"3_6","Check":"6.Is safety valve was in working condition?","Type":"radiobutton","Value":"2","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":5,"WidthPercentage":100},"DisplayValue":"No"},{"Id":"3_7","Check":"7.Is all other valves also tested and inspected as per legal requirements?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":6,"WidthPercentage":100},"DisplayValue":"Yes"},{"Id":"3_8","Check":"8.Is machine guarding was in good condition and attached all time while in operation?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":7,"WidthPercentage":100},"DisplayValue":"Yes"},{"Id":"3_9","Check":"9.Is electrical connection allowed through industrial plug only?","Type":"radiobutton","Value":"2","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":8,"WidthPercentage":100},"DisplayValue":"No"},{"Id":"3_10","Check":"10.Is all power cables are free from defects?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":9,"WidthPercentage":100},"DisplayValue":"Yes"}]},{"SectionId":4,"SectionName":"Rejection Criteria","SectionType":"radio","MandatoryChecksCount":0,"OrganisationId":null,"Status":1,"Rank":4,"AllowAttachments":true,"FileUploadControl":{"IsCameraAllowed":true,"IsImageUploadAllowed":true,"IsVideoUploadAllowed":true,"IsAudioUploadAllowed":true,"IsFileUploadAllowed":true},"Checks":[{"Id":"4_1","Check":"1.Free Air Delivery (FAD) < 90% of rated capacity. IS 5456 – Method of Testing Air Compressors","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":0,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_2","Check":"2.Final discharge pressure not achieved (e.g., <7 bar for a 7-bar unit). IS 5456","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":1,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_3","Check":"3.Air leakage from piping, joints, tank, or fittings. IS 5456 / IS 10437 – Maintenance Code","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":2,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_4","Check":"4.Oil carryover > 5 mg/m³ (for oil-lubricated compressors). IS 10437","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":3,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_5","Check":"5.Excessive vibration or abnormal noise. IS 5456","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":4,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_6","Check":"6.Pressure drop > 10% across air filter or aftercooler. IS 5456","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":5,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_7","Check":"7.Motor current exceeds 110% of rated full load. IS 325 – Electric Motors","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":6,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_8","Check":"8.Insulation resistance < 1 MΩ (motor windings). IS 325 / IS 900","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":7,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_9","Check":"9.Outlet air temperature > 15°C above ambient (without dryer) IS 5456","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":8,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_10","Check":"10.Cooling system not functioning or overheating. IS 5456","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":9,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_11","Check":"11.Faulty pressure or temperature gauge. IS 3624 – Bourdon Tube Pressure Gauges","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":10,"WidthPercentage":100},"DisplayValue":null}],"IsMainSection":false,"AllowTaskAssociation":false,"AllowTaskAssociationV2":false,"IsMandatoryAttachment":false,"IsSectionTable":false,"MaxRows":null,"RequiredRows":1,"ConditionalRules":[{"sourceSectionId":"4","sourceFieldId":"","condition":"equals","value":"","actions":"hide"},{"sourceSectionId":"2","sourceFieldId":"2_1","condition":"equals","value":1,"actions":"hide"},{"sourceSectionId":"2","sourceFieldId":"2_1","condition":"equals","value":2,"actions":"hide"},{"sourceSectionId":"2","sourceFieldId":"2_2","condition":"equals","value":1,"actions":"hide"},{"sourceSectionId":"2","sourceFieldId":"2_2","condition":"equals","value":2,"actions":"hide"}],"VisibilityRules":[],"AccessControlRules":[],"LabelStyle":{"bold":false,"italic":false,"underline":false,"fontSizePx":14,"textColor":"#111827","backgroundColor":"transparent"},"SectionFiles":[]},{"SectionId":5,"Checks":[{"Id":1,"Check":"Inspected by","Type":"signature","Value":"","IsMandatory":1,"SignatureConfiguration":{"Labels":"Inspected by ","Declaration":"","SignedUserId":20660,"SignedUserName":"Nislavonty Toribio","SignedDateAndTime":"15-Jul-2026 05:06 PM","SignedAcmRoleId":8,"DepartmentId":null,"IsAssignedToMandatory":true,"InspectionStatusId":389,"InspectionStatusName":"Inspection requested","SignedMobileNumber":"2000005135"},"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"center"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":0,"WidthPercentage":100}},{"Id":2,"Check":"Checked by","Type":"signature with approval","Value":"","IsMandatory":1,"SignatureConfiguration":{"Labels":"Checked by ","Declaration":"","SignedUserId":0,"SignedUserName":"","SignedDateAndTime":"","SignedAcmRoleId":426,"DepartmentId":null,"IsAssignedToMandatory":true,"IsRejected":false,"InspectionStatusId":0,"InspectionStatusName":"","AssignedToUserId":3582},"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"center"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":1,"WidthPercentage":100}},{"Id":3,"Check":"Verified by","Type":"signature with approval","Value":"","IsMandatory":1,"SignatureConfiguration":{"Labels":"Verified by ","Declaration":"","SignedUserId":0,"SignedUserName":"","SignedDateAndTime":"","SignedAcmRoleId":427,"DepartmentId":null,"IsAssignedToMandatory":true,"IsRejected":false,"InspectionStatusId":0,"InspectionStatusName":""},"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"center"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":2,"WidthPercentage":100}},{"Id":4,"Check":"Approved by","Type":"signature with approval","Value":"","IsMandatory":1,"SignatureConfiguration":{"Labels":"Approved by","Declaration":"","SignedUserId":0,"SignedUserName":"","SignedDateAndTime":"","SignedAcmRoleId":428,"DepartmentId":null,"IsAssignedToMandatory":false,"IsRejected":false,"InspectionStatusId":0,"InspectionStatusName":""},"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"center"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":3,"WidthPercentage":100}}],"SectionFiles":[],"SectionName":"Signatures","SectionType":"signature","AllowAttachments":false,"AllowTaskAssociation":false,"FileUploadControl":{"IsCameraAllowed":false,"IsImageUploadAllowed":false,"IsVideoUploadAllowed":false,"IsAudioUploadAllowed":false,"IsFileUploadAllowed":false}}],"AssociatedTasks":"","Area":null},"NewValue":{"Site":"Bowers","Department":null,"InspectionName":null,"AssetType":"P&M","InspectionType":"Air Compressor Inspection Checklist","Status":"Reject","Asset":"P&M - APA/AAON/P-A/HYD/01","AssignedTo":"","DueDate":null,"NonOqshaAssets":null,"Sections":[{"SectionId":2,"SectionName":"Equipment Status","SectionType":"radio","MandatoryChecksCount":0,"OrganisationId":null,"Status":1,"Rank":1,"AllowAttachments":true,"FileUploadControl":{"IsCameraAllowed":true,"IsImageUploadAllowed":true,"IsVideoUploadAllowed":true,"IsAudioUploadAllowed":true,"IsFileUploadAllowed":true},"Checks":[{"Id":"2_1","Check":"Equipment Status at Site","Type":"dynamicradiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"In Site"},{"OptionId":2,"OptionText":"Out of Site"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"vertical"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":0,"WidthPercentage":100},"DisplayValue":"In Site"},{"Id":"2_2","Check":"Equipment Usage Status","Type":"dynamicradiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"In Usage"},{"OptionId":2,"OptionText":"Out of Usage"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"vertical"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":1,"WidthPercentage":100},"DisplayValue":"In Usage"}],"IsMainSection":false,"AllowTaskAssociation":false,"AllowTaskAssociationV2":false,"IsMandatoryAttachment":false,"IsSectionTable":false,"MaxRows":null,"RequiredRows":1,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"SectionFiles":[{"Value":"attachments\\211\\inspections\\image_1784115368297_2026-07-15_11-36-10-3610_bb445b6a-0048-4021-9092-93fabdf8ca27.jpeg","FileType":"Image"}]},{"SectionId":1,"SectionName":"Inspection checks","SectionType":"checkbox","MandatoryChecksCount":0,"OrganisationId":null,"Status":1,"Rank":2,"AllowAttachments":true,"FileUploadControl":{"IsCameraAllowed":true,"IsImageUploadAllowed":false,"IsVideoUploadAllowed":false,"IsAudioUploadAllowed":false,"IsFileUploadAllowed":false},"Checks":[],"IsMainSection":false,"AllowTaskAssociation":false,"AllowTaskAssociationV2":false,"IsMandatoryAttachment":true,"IsSectionTable":false,"MaxRows":null,"RequiredRows":1,"ConditionalRules":[{"sourceSectionId":"2","sourceFieldId":"2_1","condition":"equals","value":2,"actions":"hide"},{"sourceSectionId":"2","sourceFieldId":"2_2","condition":"equals","value":2,"actions":"hide"}],"VisibilityRules":[],"AccessControlRules":[],"LabelStyle":{"bold":false,"italic":false,"underline":false,"fontSizePx":14,"textColor":"#111827","backgroundColor":"transparent"},"SectionFiles":[{"Value":"attachments\\211\\inspections\\image_1784115376064_2026-07-15_11-36-17-3617_f44256f4-13c4-4792-8aae-1f83aa80fa2b.jpeg","FileType":"Image"}]},{"SectionId":3,"SectionName":"Check Points","SectionFiles":[{"Value":"attachments\\211\\inspections\\image_1784115390261_2026-07-15_11-36-31-3631_26562106-48f9-4c08-acaf-2c62e004e73a.jpeg","FileType":"Image"}],"SectionType":"radio","AllowAttachments":true,"AllowTaskAssociation":false,"FileUploadControl":{"IsCameraAllowed":true,"IsImageUploadAllowed":true,"IsVideoUploadAllowed":true,"IsAudioUploadAllowed":true,"IsFileUploadAllowed":true},"Checks":[{"Id":"3_1","Check":"1.Is air compressor physically in good condition with TPI certificate?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":0,"WidthPercentage":100},"DisplayValue":"Yes"},{"Id":"3_2","Check":"2.Is motor physical condition is good and guard is provided to rotary part?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":1,"WidthPercentage":100},"DisplayValue":"Yes"},{"Id":"3_3","Check":"3.Is inspection date and due date was marked properly and visible?","Type":"radiobutton","Value":"2","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":2,"WidthPercentage":100},"DisplayValue":"No"},{"Id":"3_4","Check":"4.Is piston was in good condition?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":3,"WidthPercentage":100},"DisplayValue":"Yes"},{"Id":"3_5","Check":"5.Is pressure gauge was free from defect and working in condition with calibration as per requirement?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":4,"WidthPercentage":100},"DisplayValue":"Yes"},{"Id":"3_6","Check":"6.Is safety valve was in working condition?","Type":"radiobutton","Value":"2","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":5,"WidthPercentage":100},"DisplayValue":"No"},{"Id":"3_7","Check":"7.Is all other valves also tested and inspected as per legal requirements?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":6,"WidthPercentage":100},"DisplayValue":"Yes"},{"Id":"3_8","Check":"8.Is machine guarding was in good condition and attached all time while in operation?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":7,"WidthPercentage":100},"DisplayValue":"Yes"},{"Id":"3_9","Check":"9.Is electrical connection allowed through industrial plug only?","Type":"radiobutton","Value":"2","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":8,"WidthPercentage":100},"DisplayValue":"No"},{"Id":"3_10","Check":"10.Is all power cables are free from defects?","Type":"radiobutton","Value":"1","IsMandatory":1,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":9,"WidthPercentage":100},"DisplayValue":"Yes"}]},{"SectionId":4,"SectionName":"Rejection Criteria","SectionType":"radio","MandatoryChecksCount":0,"OrganisationId":null,"Status":1,"Rank":4,"AllowAttachments":true,"FileUploadControl":{"IsCameraAllowed":true,"IsImageUploadAllowed":true,"IsVideoUploadAllowed":true,"IsAudioUploadAllowed":true,"IsFileUploadAllowed":true},"Checks":[{"Id":"4_1","Check":"1.Free Air Delivery (FAD) < 90% of rated capacity. IS 5456 – Method of Testing Air Compressors","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":0,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_2","Check":"2.Final discharge pressure not achieved (e.g., <7 bar for a 7-bar unit). IS 5456","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":1,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_3","Check":"3.Air leakage from piping, joints, tank, or fittings. IS 5456 / IS 10437 – Maintenance Code","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":2,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_4","Check":"4.Oil carryover > 5 mg/m³ (for oil-lubricated compressors). IS 10437","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":3,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_5","Check":"5.Excessive vibration or abnormal noise. IS 5456","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":4,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_6","Check":"6.Pressure drop > 10% across air filter or aftercooler. IS 5456","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":5,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_7","Check":"7.Motor current exceeds 110% of rated full load. IS 325 – Electric Motors","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":6,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_8","Check":"8.Insulation resistance < 1 MΩ (motor windings). IS 325 / IS 900","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":7,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_9","Check":"9.Outlet air temperature > 15°C above ambient (without dryer) IS 5456","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":8,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_10","Check":"10.Cooling system not functioning or overheating. IS 5456","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":9,"WidthPercentage":100},"DisplayValue":null},{"Id":"4_11","Check":"11.Faulty pressure or temperature gauge. IS 3624 – Bourdon Tube Pressure Gauges","Type":"radiobutton","Value":"","IsMandatory":0,"CheckOptions":[{"OptionId":1,"OptionText":"Yes"},{"OptionId":2,"OptionText":"No"},{"OptionId":3,"OptionText":"N/A"}],"CheckConfiguration":{"Validations":{"Required":false,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"horizontal"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":10,"WidthPercentage":100},"DisplayValue":null}],"IsMainSection":false,"AllowTaskAssociation":false,"AllowTaskAssociationV2":false,"IsMandatoryAttachment":false,"IsSectionTable":false,"MaxRows":null,"RequiredRows":1,"ConditionalRules":[{"sourceSectionId":"4","sourceFieldId":"","condition":"equals","value":"","actions":"hide"},{"sourceSectionId":"2","sourceFieldId":"2_1","condition":"equals","value":1,"actions":"hide"},{"sourceSectionId":"2","sourceFieldId":"2_1","condition":"equals","value":2,"actions":"hide"},{"sourceSectionId":"2","sourceFieldId":"2_2","condition":"equals","value":1,"actions":"hide"},{"sourceSectionId":"2","sourceFieldId":"2_2","condition":"equals","value":2,"actions":"hide"}],"VisibilityRules":[],"AccessControlRules":[],"LabelStyle":{"bold":false,"italic":false,"underline":false,"fontSizePx":14,"textColor":"#111827","backgroundColor":"transparent"},"SectionFiles":[]},{"SectionId":5,"Checks":[{"Id":1,"Check":"Inspected by","Type":"signature","Value":"","IsMandatory":1,"SignatureConfiguration":{"Labels":"Inspected by","Declaration":"","SignedAcmRoleId":8,"DepartmentId":null,"IsAssignedToMandatory":true},"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"center"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":0,"WidthPercentage":100}},{"Id":2,"Check":"Checked by","Type":"signature with approval","Value":"","IsMandatory":1,"SignatureConfiguration":{"Labels":"Checked by","Declaration":"","SignedAcmRoleId":426,"DepartmentId":null,"IsAssignedToMandatory":true,"AssignedToUserId":3582},"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"center"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":1,"WidthPercentage":100}},{"Id":3,"Check":"Verified by","Type":"signature with approval","Value":"","IsMandatory":1,"SignatureConfiguration":{"Labels":"Verified by","Declaration":"","SignedAcmRoleId":427,"DepartmentId":null,"IsAssignedToMandatory":true},"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"center"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":2,"WidthPercentage":100}},{"Id":4,"Check":"Approved by","Type":"signature with approval","Value":"","IsMandatory":1,"SignatureConfiguration":{"Labels":"Approved by","Declaration":"","SignedAcmRoleId":428,"DepartmentId":null,"IsAssignedToMandatory":false},"CheckConfiguration":{"Validations":{"Required":true,"RequiredMessage":"This field is required","MinLength":null,"MinLengthMessage":null,"MaxLength":null,"MaxLengthMessage":null,"Min":null,"MinMessage":null,"Max":null,"MaxMessage":null,"Pattern":null,"PatternMessage":null},"Placeholder":"","DisplayOrientation":"vertical","Multiselect":false,"ShouldReset":false,"FloatingLabel":false,"DisplayAsColumn":false,"DisplayAsFilter":false,"ReadOnly":false,"ConditionalRules":[],"VisibilityRules":[],"AccessControlRules":[],"DynamicLabels":[],"Alignment":"center"},"LayoutMetadata":{"RowNumber":0,"ColumnOrder":3,"WidthPercentage":100}}],"SectionFiles":[],"SectionName":"Signatures","SectionType":"signature","AllowAttachments":false,"AllowTaskAssociation":false,"FileUploadControl":{"IsCameraAllowed":false,"IsImageUploadAllowed":false,"IsVideoUploadAllowed":false,"IsAudioUploadAllowed":false,"IsFileUploadAllowed":false}}],"AssociatedTasks":"","Area":null}}
API Response:


System.InvalidOperationException: JSReport render failed. Status: 404. Response: {"type":"about:blank","title":"Not Found","status":404,"detail":"Template 9c5957da-5182-4e69-a47f-df5b80db1436 not found","instance":"/api/v1/render","error_code":"NOT_FOUND"}
   at IncidentReporter.API.Helpers.JsReportUtils.<RenderPdfAsync>d__0.MoveNext() in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\Helpers\JsReportUtils.cs:line 70
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at IncidentReporter.API.Helpers.PdfExportSwitchHelper.<TryRenderPdfViaJsReportAsync>d__0.MoveNext() in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\Helpers\PdfExportSwitchHelper.cs:line 59


System.IO.FileNotFoundException: HTML template missing for Height Work category. Expected HTML template path: D:\App-Data\iis\api.incidentreporter365.com\Templates/PDFs\264\WorkPermitV2\HeightWork\ExportWorkPermitV2.html
File name: 'D:\App-Data\iis\api.incidentreporter365.com\Templates/PDFs\264\WorkPermitV2\HeightWork\ExportWorkPermitV2.html'
   at IncidentReporter.API.Helpers.WorkPermitV2PDFHelper.ResolveTemplatePath(String baseDir, String templatesRoot, String orgId, String module, String categoryFolder, String fileName) in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\Helpers\WorkPermitV2PDFHelper.cs:line 89
   at IncidentReporter.API.Helpers.WorkPermitV2PDFHelper.<ExportWorkPermitV2PDFAsync>d__1.MoveNext() in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\Helpers\WorkPermitV2PDFHelper.cs:line 0
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at IncidentReporter.API.BLL.WorkPermitV2Bll.<ExportWorkPermitV2PDFAsync>d__11.MoveNext() in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\BLL\WorkPermitV2Bll.cs:line 1556


Failed to send audit log: Unauthorized
Request Payload: {"EntityTypeId":26,"EntityId":3204,"ChangedBy":{"UserId":267,"Name":"Hebert Eaton"},"ChangeType":"Created","OldValue":null,"NewValue":{"Uid":null,"SiteName":"Colver","Department":"EHS","DepartmentIncharge":null,"TypeOfPermit":"Confined Space Entry, Electrical Work","Contractor":null,"NameOfRequestor":"Hebert Eaton","Shift":"Third Shift","WorkPermitDateStart":"15-Jul-2026","WorkPermitDateEnd":"16-Jul-2026","WorkPermitTimeStart":"10:00 PM","WorkPermitTimeEnd":"06:00 AM","IsManualPtw":false,"Approvers":null,"Status":"Submit","Description":"","Location":""}}
API Response:

Improper Access to reach confined space work area

No access ladder inside the confined space

Has all piping been isolated by disconnect? (Physical Spool Removal or Blind Provided)

Is LOTO applied on Incoming power supply

Has all electrical equipment associated with the vessel been locked out and tagged out & tested out?

Conducted a thorough inspection of the work area and identified potential electrical hazards

Is vessel clean and free of hazardous residue?

Ensured all necessary precautions have been taken to mitigate electrical risks

If not, have appropriate safeguards been taken to assure safe entry?

Verified that all personnel involved in the electrical work activity have received appropriate training and possess the required skills

Has vessel been mechanically ventilated adequately prior to entry? If required provide the continuous mechanical ventilation.

Confirmed that all relevant permits, licenses, and authorizations have been obtained

Is a ladder inside the vessel and secured ?

Verified that the work area is free from any potential electrical hazards or risks

Are all entrants wearing a full body harness with life line attached along with the whistle ?

Ensured proper isolation of electrical equipment from the power source and tagged/locked out

Is entrants register format with name, in time, out time and signature is available.

Provided workers with appropriate personal protective equipment (PPE) for electrical work

Has a watch person is assigned and given proper instructions along with SCBA ?

Conducted a final inspection before authorizing the electrical work activity

Communicated all necessary safety precautions to workers

Has instructions been given to use rubber insulated mats or shoes, when welding or conducting electrical work in a damp or metal confined space ?

Confirmed that appropriate testing equipment, such as voltage testers and multimeters, are available and in proper working condition

Are all electrical tools and in good condition & green tag provided

Verified that workers are aware of the proper procedures for electrical isolation, lockout/tagout, and testing before starting work

Is separate work permit taken for other works like holt work, cold work, etc.. Confined space entry permit only for entry in the space & not to do the work

Ensured that workers are trained in the safe handling of electrical equipment and materials

Use detectors to monitor H2S, Oxygen and LEL level, for all confined space entries

Verified that workers have received proper training on electrical safety

Have instructions been given to watch person to abort the entry if signs and symptoms of exposure occur and/ or the oxygen level drops to 19.5% or rises to 23.5%.

Established and communicated an emergency response plan

If any of the above criteria required is not met, then do not issue the work permit.

3. Safety Equipment Requirement & PPE to be used


Failed to send audit log: Unauthorized
Request Payload: {"EntityTypeId":26,"EntityId":3204,"ChangedBy":{"UserId":267,"Name":"Hebert Eaton"},"ChangeType":"Updated","OldValue":{"Uid":null,"SiteName":"Colver","Department":"EHS","DepartmentIncharge":null,"TypeOfPermit":"Confined Space Entry, Electrical Work","Contractor":null,"NameOfRequestor":null,"Shift":"Third Shift","WorkPermitDateStart":"15-Jul-2026","WorkPermitDateEnd":"16-Jul-2026","WorkPermitTimeStart":"10:00 PM","WorkPermitTimeEnd":"06:00 AM","IsManualPtw":false,"Approvers":null,"Status":null,"Description":"","Location":""},"NewValue":{"Uid":null,"SiteName":"Colver","Department":"EHS","DepartmentIncharge":null,"TypeOfPermit":"Confined Space Entry, Electrical Work","Contractor":"Precision BioSciences Inc.","NameOfRequestor":null,"Shift":"Third Shift","WorkPermitDateStart":"15-Jul-2026","WorkPermitDateEnd":"16-Jul-2026","WorkPermitTimeStart":"10:00 PM","WorkPermitTimeEnd":"06:00 AM","IsManualPtw":false,"Approvers":null,"Status":null,"Description":"","Location":""}}
API Response:

Improper Access to reach confined space work area

No access ladder inside the confined space

Has all piping been isolated by disconnect? (Physical Spool Removal or Blind Provided)

Is LOTO applied on Incoming power supply

Has all electrical equipment associated with the vessel been locked out and tagged out & tested out?

Conducted a thorough inspection of the work area and identified potential electrical hazards

Is vessel clean and free of hazardous residue?

Ensured all necessary precautions have been taken to mitigate electrical risks

If not, have appropriate safeguards been taken to assure safe entry?

Verified that all personnel involved in the electrical work activity have received appropriate training and possess the required skills

Has vessel been mechanically ventilated adequately prior to entry? If required provide the continuous mechanical ventilation.

Confirmed that all relevant permits, licenses, and authorizations have been obtained

Is a ladder inside the vessel and secured ?

Verified that the work area is free from any potential electrical hazards or risks

Are all entrants wearing a full body harness with life line attached along with the whistle ?

Ensured proper isolation of electrical equipment from the power source and tagged/locked out

Is entrants register format with name, in time, out time and signature is available.

Provided workers with appropriate personal protective equipment (PPE) for electrical work

Has a watch person is assigned and given proper instructions along with SCBA ?

Conducted a final inspection before authorizing the electrical work activity

Communicated all necessary safety precautions to workers

Has instructions been given to use rubber insulated mats or shoes, when welding or conducting electrical work in a damp or metal confined space ?

Confirmed that appropriate testing equipment, such as voltage testers and multimeters, are available and in proper working condition

Are all electrical tools and in good condition & green tag provided

Verified that workers are aware of the proper procedures for electrical isolation, lockout/tagout, and testing before starting work

Is separate work permit taken for other works like holt work, cold work, etc.. Confined space entry permit only for entry in the space & not to do the work

Ensured that workers are trained in the safe handling of electrical equipment and materials

Use detectors to monitor H2S, Oxygen and LEL level, for all confined space entries

Verified that workers have received proper training on electrical safety

Have instructions been given to watch person to abort the entry if signs and symptoms of exposure occur and/ or the oxygen level drops to 19.5% or rises to 23.5%.

Established and communicated an emergency response plan

If any of the above criteria required is not met, then do not issue the work permit.

apprv

Work Cancelled due to Operational Reasons


Failed to send audit log: Unauthorized
Request Payload: {"EntityTypeId":26,"EntityId":3205,"ChangedBy":{"UserId":267,"Name":"Hebert Eaton"},"ChangeType":"Created","OldValue":null,"NewValue":{"Uid":null,"SiteName":"Colver","Department":"Accounts","DepartmentIncharge":null,"TypeOfPermit":"Excavation Work, General - Cold Work","Contractor":null,"NameOfRequestor":"Hebert Eaton","Shift":"General Shift","WorkPermitDateStart":"16-Jul-2026","WorkPermitDateEnd":"16-Jul-2026","WorkPermitTimeStart":"09:30 AM","WorkPermitTimeEnd":"11:30 AM","IsManualPtw":false,"Approvers":null,"Status":"Submit","Description":"","Location":""}}
API Response:

Improper Access to reach confined space work area

No access ladder inside the confined space

Is all hand tools & equipment�s inspected & green tag provided?

Is all hand tools & equipment�s inspected & tag provided?

Electrical Isolation � If yes, Is Isolation Done?

Area is free from any Loose electrical joint/cables & sharp edges.

Other pipeline / utilities Isolation � Is Isolation Done

Ensure no underground cables & pipelines in vicinity of work area.

Drawings checked for underground Piping, Electrical or Instrumentation cable

Is layout drawing attached & excavation area was marked

Surrounding area is checked, cleaned & safe

Is Signature taken from Maintenance & IT for underground utility clearance in attached layout drawing

Equipment properly drained / de pressurized

Is Excavation tools like crow bars, etc are Insulated

LOTO to applied for the work & equipment is safe

Shoring (required for excavation depth exceeding 5 feet)

Availability of sufficient illumination at work spot. Checked relevant PPE.

Is vehicle movement stopped at nearby area (for 5 m radius) if depth more than 2 feet

Mechanical Excavation � Is vehicle inspected & green tag provided

Any other source of potential hazard if any remove before start of work.

Is trail pit tried for the underground utility identification?

All necessary guarding provided in the rotary objects

Is access ladder available for entry into excavated area (Depth more than 2 feet)

Is Area barricaded for unauthorized people movement & warning signage�s displayed?

Ensure the work not carrying in running operation

Caution board mentioning "Job in Progress" installed near working area.

Is adequate lighting provided, if work planned on dark hours?

If emergency route blocked, Is alternate route identified & communicated to stakeholders?

If any of the above criteria required is not met, then do not issue the work permit


Failed to send audit log: Unauthorized
Request Payload: {"EntityTypeId":26,"EntityId":3204,"ChangedBy":{"UserId":267,"Name":"Hebert Eaton"},"ChangeType":"Updated","OldValue":{"Uid":null,"SiteName":"Colver","Department":"EHS","DepartmentIncharge":null,"TypeOfPermit":"Confined Space Entry, Electrical Work","Contractor":"Precision BioSciences Inc.","NameOfRequestor":null,"Shift":"Third Shift","WorkPermitDateStart":"15-Jul-2026","WorkPermitDateEnd":"16-Jul-2026","WorkPermitTimeStart":"10:00 PM","WorkPermitTimeEnd":"06:00 AM","IsManualPtw":false,"Approvers":null,"Status":null,"Description":"","Location":""},"NewValue":{"Uid":null,"SiteName":"Colver","Department":"EHS","DepartmentIncharge":null,"TypeOfPermit":"Confined Space Entry, Electrical Work","Contractor":"Precision BioSciences Inc.","NameOfRequestor":null,"Shift":"Third Shift","WorkPermitDateStart":"15-Jul-2026","WorkPermitDateEnd":"16-Jul-2026","WorkPermitTimeStart":"10:00 PM","WorkPermitTimeEnd":"06:00 AM","IsManualPtw":false,"Approvers":null,"Status":null,"Description":"","Location":""}}
API Response:

Improper Access to reach confined space work area

No access ladder inside the confined space

Has all piping been isolated by disconnect? (Physical Spool Removal or Blind Provided)

Is LOTO applied on Incoming power supply

Has all electrical equipment associated with the vessel been locked out and tagged out & tested out?

Conducted a thorough inspection of the work area and identified potential electrical hazards

Is vessel clean and free of hazardous residue?

Ensured all necessary precautions have been taken to mitigate electrical risks

If not, have appropriate safeguards been taken to assure safe entry?

Verified that all personnel involved in the electrical work activity have received appropriate training and possess the required skills

Has vessel been mechanically ventilated adequately prior to entry? If required provide the continuous mechanical ventilation.

Confirmed that all relevant permits, licenses, and authorizations have been obtained

Is a ladder inside the vessel and secured ?

Verified that the work area is free from any potential electrical hazards or risks

Are all entrants wearing a full body harness with life line attached along with the whistle ?

Ensured proper isolation of electrical equipment from the power source and tagged/locked out

Is entrants register format with name, in time, out time and signature is available.

Provided workers with appropriate personal protective equipment (PPE) for electrical work

Has a watch person is assigned and given proper instructions along with SCBA ?

Conducted a final inspection before authorizing the electrical work activity

Communicated all necessary safety precautions to workers

Has instructions been given to use rubber insulated mats or shoes, when welding or conducting electrical work in a damp or metal confined space ?

Confirmed that appropriate testing equipment, such as voltage testers and multimeters, are available and in proper working condition

Are all electrical tools and in good condition & green tag provided

Verified that workers are aware of the proper procedures for electrical isolation, lockout/tagout, and testing before starting work

Is separate work permit taken for other works like holt work, cold work, etc.. Confined space entry permit only for entry in the space & not to do the work

Ensured that workers are trained in the safe handling of electrical equipment and materials

Use detectors to monitor H2S, Oxygen and LEL level, for all confined space entries

Verified that workers have received proper training on electrical safety

Have instructions been given to watch person to abort the entry if signs and symptoms of exposure occur and/ or the oxygen level drops to 19.5% or rises to 23.5%.

Established and communicated an emergency response plan

If any of the above criteria required is not met, then do not issue the work permit.

update


Full Body Harness Safety Belt with Double lanyard

Apron/ Leather jacket/ Specific PVC suit

Gloves(Cut Resistant, Cryogenic, Cotton etc)

Electrical Wire/ Cable checked (No Joints/No Damaged Cables)

O2= 19.5-23.5% ; Enter Initial Value:___

Permissible limit LEL checking: _________________

Food Safety Measures Required (Quality-Incharge)

Area work covered to prevent cross /foreign matter contamination

All finished Goods /Raw materials/Equipments to be removed

Hot work (welding/drilling/cutting) not allowed during line running

Post completion all materials /equipments /PPE's to be removed to prevent foreign matter contamination


Failed to send audit log: Unauthorized
Request Payload: {"EntityTypeId":26,"EntityId":3204,"ChangedBy":{"UserId":5538,"Name":"Mozell Heaton"},"ChangeType":"Updated","OldValue":{"Uid":null,"SiteName":"Colver","Department":"EHS","DepartmentIncharge":null,"TypeOfPermit":"Confined Space Entry, Electrical Work","Contractor":"Precision BioSciences Inc.","NameOfRequestor":null,"Shift":"Third Shift","WorkPermitDateStart":"15-Jul-2026","WorkPermitDateEnd":"16-Jul-2026","WorkPermitTimeStart":"10:00 PM","WorkPermitTimeEnd":"06:00 AM","IsManualPtw":false,"Approvers":null,"Status":null,"Description":"","Location":""},"NewValue":{"Uid":null,"SiteName":"Colver","Department":"EHS","DepartmentIncharge":null,"TypeOfPermit":"Confined Space Entry, Electrical Work","Contractor":"Precision BioSciences Inc.","NameOfRequestor":null,"Shift":"Third Shift","WorkPermitDateStart":"15-Jul-2026","WorkPermitDateEnd":"16-Jul-2026","WorkPermitTimeStart":"10:00 PM","WorkPermitTimeEnd":"06:00 AM","IsManualPtw":false,"Approvers":null,"Status":null,"Description":"","Location":""}}
API Response:

Improper Access to reach confined space work area

No access ladder inside the confined space

Has all piping been isolated by disconnect? (Physical Spool Removal or Blind Provided)

Is LOTO applied on Incoming power supply

Has all electrical equipment associated with the vessel been locked out and tagged out & tested out?

Conducted a thorough inspection of the work area and identified potential electrical hazards

Is vessel clean and free of hazardous residue?

Ensured all necessary precautions have been taken to mitigate electrical risks

If not, have appropriate safeguards been taken to assure safe entry?

Verified that all personnel involved in the electrical work activity have received appropriate training and possess the required skills

Has vessel been mechanically ventilated adequately prior to entry? If required provide the continuous mechanical ventilation.

Confirmed that all relevant permits, licenses, and authorizations have been obtained

Is a ladder inside the vessel and secured ?

Verified that the work area is free from any potential electrical hazards or risks

Are all entrants wearing a full body harness with life line attached along with the whistle ?

Ensured proper isolation of electrical equipment from the power source and tagged/locked out

Is entrants register format with name, in time, out time and signature is available.

Provided workers with appropriate personal protective equipment (PPE) for electrical work

Has a watch person is assigned and given proper instructions along with SCBA ?

Conducted a final inspection before authorizing the electrical work activity

Communicated all necessary safety precautions to workers

Has instructions been given to use rubber insulated mats or shoes, when welding or conducting electrical work in a damp or metal confined space ?

Confirmed that appropriate testing equipment, such as voltage testers and multimeters, are available and in proper working condition

Are all electrical tools and in good condition & green tag provided

Verified that workers are aware of the proper procedures for electrical isolation, lockout/tagout, and testing before starting work

Is separate work permit taken for other works like holt work, cold work, etc.. Confined space entry permit only for entry in the space & not to do the work

Ensured that workers are trained in the safe handling of electrical equipment and materials

Use detectors to monitor H2S, Oxygen and LEL level, for all confined space entries

Verified that workers have received proper training on electrical safety

Have instructions been given to watch person to abort the entry if signs and symptoms of exposure occur and/ or the oxygen level drops to 19.5% or rises to 23.5%.

Established and communicated an emergency response plan

If any of the above criteria required is not met, then do not issue the work permit.

apprv


Failed to send audit log: Unauthorized
Request Payload: {"EntityTypeId":23,"EntityId":77156,"ChangedBy":{"UserId":881,"Name":"Sincere Kidwell"},"ChangeType":"Created","OldValue":null,"NewValue":{"Uid":"T/MIRA/EEE/26/00002","Status":null,"Site":"Rio","UserType":null,"ReportedBy":"Sincere Kidwell","Category":"EHS-Accident/Incident","Department":"Chocolate","AssignedTo":null,"Severity":"Low","DueDate":"","UsersInvolved":null,"OthersInvolved":"","AssetsInvolved":"","IncidentDateTime":null,"Area":null}}
API Response:

Answer:
**(Client Specific Testing)(PTW)[Portal][Medium][Sprint 50]: PTW Status Does Not Update Automatically After Approval or Verification
**

Answer:
**(Client Specific Testing)(PTW)[Portal][Medium][Sprint 50]: PTW Status Does Not Update Automatically After Approval or Verification
**

Answer:
**(Client Specific Testing)(PTW)[Portal][Medium][Sprint 50]: PTW Status Does Not Update Automatically After Approval or Verification
**

Answer:
**(Client Specific Testing)(PTW)[Portal][Medium][Sprint 50]: PTW Status Does Not Update Automatically After Approval or Verification
**

Answer:
**(Client Specific Testing)(PTW)[Portal][Medium][Sprint 50]: PTW Status Does Not Update Automatically After Approval or Verification
**

Answer:
**(Client Specific Testing)(PTW)[Portal][Medium][Sprint 50]: PTW Status Does Not Update Automatically After Approval or Verification
**

Answer:
**(Client Specific Testing)(PTW)[Portal][Medium][Sprint 50]: PTW Status Does Not Update Automatically After Approval or Verification
**

Answer: Lost Time Accident/Incident

Answer:
**(Client Specific Testing)(PTW)[Portal][Medium][Sprint 50]: PTW Status Does Not Update Automatically After Approval or Verification
**

Answer: Cut Injury

Answer:
**(Client Specific Testing)(PTW)[Portal][Medium][Sprint 50]: PTW Status Does Not Update Automatically After Approval or Verification
**

Answer:
**(Client Specific Testing)(PTW)[Portal][Medium][Sprint 50]: PTW Status Does Not Update Automatically After Approval or Verification
**

Answer:
**(Client Specific Testing)(PTW)[Portal][Medium][Sprint 50]: PTW Status Does Not Update Automatically After Approval or Verification
**

Answer:
**(Client Specific Testing)(PTW)[Portal][Medium][Sprint 50]: PTW Status Does Not Update Automatically After Approval or Verification
**

Answer:
**(Client Specific Testing)(PTW)[Portal][Medium][Sprint 50]: PTW Status Does Not Update Automatically After Approval or Verification
**


Failed to send audit log: Unauthorized
Request Payload: {"EntityTypeId":26,"EntityId":3204,"ChangedBy":{"UserId":5532,"Name":"Lesia Hardman"},"ChangeType":"Updated","OldValue":{"Uid":null,"SiteName":"Colver","Department":"EHS","DepartmentIncharge":null,"TypeOfPermit":"Confined Space Entry, Electrical Work","Contractor":"Precision BioSciences Inc.","NameOfRequestor":null,"Shift":"Third Shift","WorkPermitDateStart":"15-Jul-2026","WorkPermitDateEnd":"16-Jul-2026","WorkPermitTimeStart":"10:00 PM","WorkPermitTimeEnd":"06:00 AM","IsManualPtw":false,"Approvers":null,"Status":null,"Description":"","Location":""},"NewValue":{"Uid":null,"SiteName":"Colver","Department":"EHS","DepartmentIncharge":null,"TypeOfPermit":"Confined Space Entry, Electrical Work","Contractor":"Precision BioSciences Inc.","NameOfRequestor":null,"Shift":"Third Shift","WorkPermitDateStart":"15-Jul-2026","WorkPermitDateEnd":"16-Jul-2026","WorkPermitTimeStart":"10:00 PM","WorkPermitTimeEnd":"06:00 AM","IsManualPtw":false,"Approvers":null,"Status":null,"Description":"","Location":""}}
API Response:

Improper Access to reach confined space work area

No access ladder inside the confined space

Has all piping been isolated by disconnect? (Physical Spool Removal or Blind Provided)

Is LOTO applied on Incoming power supply

Has all electrical equipment associated with the vessel been locked out and tagged out & tested out?

Conducted a thorough inspection of the work area and identified potential electrical hazards

Is vessel clean and free of hazardous residue?

Ensured all necessary precautions have been taken to mitigate electrical risks

If not, have appropriate safeguards been taken to assure safe entry?

Verified that all personnel involved in the electrical work activity have received appropriate training and possess the required skills

Has vessel been mechanically ventilated adequately prior to entry? If required provide the continuous mechanical ventilation.

Confirmed that all relevant permits, licenses, and authorizations have been obtained

Is a ladder inside the vessel and secured ?

Verified that the work area is free from any potential electrical hazards or risks

Are all entrants wearing a full body harness with life line attached along with the whistle ?

Ensured proper isolation of electrical equipment from the power source and tagged/locked out

Is entrants register format with name, in time, out time and signature is available.

Provided workers with appropriate personal protective equipment (PPE) for electrical work

Has a watch person is assigned and given proper instructions along with SCBA ?

Conducted a final inspection before authorizing the electrical work activity

Communicated all necessary safety precautions to workers

Has instructions been given to use rubber insulated mats or shoes, when welding or conducting electrical work in a damp or metal confined space ?

Confirmed that appropriate testing equipment, such as voltage testers and multimeters, are available and in proper working condition

Are all electrical tools and in good condition & green tag provided

Verified that workers are aware of the proper procedures for electrical isolation, lockout/tagout, and testing before starting work

Is separate work permit taken for other works like holt work, cold work, etc.. Confined space entry permit only for entry in the space & not to do the work

Ensured that workers are trained in the safe handling of electrical equipment and materials

Use detectors to monitor H2S, Oxygen and LEL level, for all confined space entries

Verified that workers have received proper training on electrical safety

Have instructions been given to watch person to abort the entry if signs and symptoms of exposure occur and/ or the oxygen level drops to 19.5% or rises to 23.5%.

Established and communicated an emergency response plan

If any of the above criteria required is not met, then do not issue the work permit.

approve


*** MULTIPART FORM DATA / FILE UPLOAD (OMITTED FOR LOGGING) ***


Failed to send audit log: Unauthorized
Request Payload: {"EntityTypeId":23,"EntityId":77156,"ChangedBy":{"UserId":881,"Name":"Sincere Kidwell"},"ChangeType":"Updated","OldValue":{"Uid":"T/MIRA/EEE/26/00002","Status":null,"Site":"Rio","UserType":null,"ReportedBy":"Sincere Kidwell","Category":"EHS-Accident/Incident","Department":"Chocolate","AssignedTo":"Sincere Kidwell","Severity":"Low","DueDate":"31-Jul-2026","UsersInvolved":"","OthersInvolved":"","AssetsInvolved":"","IncidentDateTime":null,"Area":null},"NewValue":{"Uid":"T/MIRA/EEE/26/00002","Status":null,"Site":"Rio","UserType":null,"ReportedBy":"Sincere Kidwell","Category":"EHS-Accident/Incident","Department":"Chocolate","AssignedTo":"Sincere Kidwell","Severity":"Low","DueDate":"31-Jul-2026","UsersInvolved":null,"OthersInvolved":"","AssetsInvolved":"","IncidentDateTime":null,"Area":null}}
API Response:


Failed to send audit log: Unauthorized
Request Payload: {"EntityTypeId":26,"EntityId":3204,"ChangedBy":{"UserId":267,"Name":"Hebert Eaton"},"ChangeType":"Updated","OldValue":{"Uid":null,"SiteName":"Colver","Department":"EHS","DepartmentIncharge":null,"TypeOfPermit":"Confined Space Entry, Electrical Work","Contractor":"Precision BioSciences Inc.","NameOfRequestor":null,"Shift":"Third Shift","WorkPermitDateStart":"15-Jul-2026","WorkPermitDateEnd":"16-Jul-2026","WorkPermitTimeStart":"10:00 PM","WorkPermitTimeEnd":"06:00 AM","IsManualPtw":false,"Approvers":null,"Status":null,"Description":"","Location":""},"NewValue":{"Uid":null,"SiteName":"Colver","Department":"EHS","DepartmentIncharge":null,"TypeOfPermit":"Confined Space Entry, Electrical Work","Contractor":"Precision BioSciences Inc.","NameOfRequestor":null,"Shift":null,"WorkPermitDateStart":"15-Jul-2026","WorkPermitDateEnd":"16-Jul-2026","WorkPermitTimeStart":"10:00 PM","WorkPermitTimeEnd":"06:00 AM","IsManualPtw":false,"Approvers":null,"Status":null,"Description":"","Location":""}}
API Response:

Improper Access to reach confined space work area

No access ladder inside the confined space

Has all piping been isolated by disconnect? (Physical Spool Removal or Blind Provided)

Is LOTO applied on Incoming power supply

Has all electrical equipment associated with the vessel been locked out and tagged out & tested out?

Conducted a thorough inspection of the work area and identified potential electrical hazards

Is vessel clean and free of hazardous residue?

Ensured all necessary precautions have been taken to mitigate electrical risks

If not, have appropriate safeguards been taken to assure safe entry?

Verified that all personnel involved in the electrical work activity have received appropriate training and possess the required skills

Has vessel been mechanically ventilated adequately prior to entry? If required provide the continuous mechanical ventilation.

Confirmed that all relevant permits, licenses, and authorizations have been obtained

Is a ladder inside the vessel and secured ?

Verified that the work area is free from any potential electrical hazards or risks

Are all entrants wearing a full body harness with life line attached along with the whistle ?

Ensured proper isolation of electrical equipment from the power source and tagged/locked out

Is entrants register format with name, in time, out time and signature is available.

Provided workers with appropriate personal protective equipment (PPE) for electrical work

Has a watch person is assigned and given proper instructions along with SCBA ?

Conducted a final inspection before authorizing the electrical work activity

Communicated all necessary safety precautions to workers

Has instructions been given to use rubber insulated mats or shoes, when welding or conducting electrical work in a damp or metal confined space ?

Confirmed that appropriate testing equipment, such as voltage testers and multimeters, are available and in proper working condition

Are all electrical tools and in good condition & green tag provided

Verified that workers are aware of the proper procedures for electrical isolation, lockout/tagout, and testing before starting work

Is separate work permit taken for other works like holt work, cold work, etc.. Confined space entry permit only for entry in the space & not to do the work

Ensured that workers are trained in the safe handling of electrical equipment and materials

Use detectors to monitor H2S, Oxygen and LEL level, for all confined space entries

Verified that workers have received proper training on electrical safety

Have instructions been given to watch person to abort the entry if signs and symptoms of exposure occur and/ or the oxygen level drops to 19.5% or rises to 23.5%.

Established and communicated an emergency response plan

If any of the above criteria required is not met, then do not issue the work permit.


Failed to send audit log: Unauthorized
Request Payload: {"EntityTypeId":11,"EntityId":35144,"ChangedBy":{"UserId":20659,"Name":"Martine Troyer"},"ChangeType":"Created","OldValue":null,"NewValue":{"Site":"Bowers","Department":null,"InspectionName":null,"AssetType":"P&M","InspectionType":"Air Compressor Inspection Checklist","Status":"Inspection requested","Asset":"P&M - APA/ASO/P-A/HYD/01","AssignedTo":"","DueDate":null,"NonOqshaAssets":"","Sections":null,"AssociatedTasks":null,"Area":""}}
API Response:

1.Is air compressor physically in good condition with TPI certificate?

2.Is motor physical condition is good and guard is provided to rotary part?

3.Is inspection date and due date was marked properly and visible?

5.Is pressure gauge was free from defect and working in condition with calibration as per requirement?

6.Is safety valve was in working condition?

7.Is all other valves also tested and inspected as per legal requirements?

8.Is machine guarding was in good condition and attached all time while in operation?

9.Is electrical connection allowed through industrial plug only?

10.Is all power cables are free from defects?

1.Free Air Delivery (FAD) < 90% of rated capacity. IS 5456 � Method of Testing Air Compressors

2.Final discharge pressure not achieved (e.g., <7 bar for a 7-bar unit). IS 5456

3.Air leakage from piping, joints, tank, or fittings. IS 5456 / IS 10437 � Maintenance Code

4.Oil carryover > 5 mg/m� (for oil-lubricated compressors). IS 10437

5.Excessive vibration or abnormal noise. IS 5456

6.Pressure drop > 10% across air filter or aftercooler. IS 5456

7.Motor current exceeds 110% of rated full load. IS 325 � Electric Motors

8.Insulation resistance < 1 MO (motor windings). IS 325 / IS 900

9.Outlet air temperature > 15�C above ambient (without dryer) IS 5456

10.Cooling system not functioning or overheating. IS 5456

11.Faulty pressure or temperature gauge. IS 3624 � Bourdon Tube Pressure Gauges